Omnipure’s engineering team has produced a strong, one-piece block with an extended life. It is unsurpassed at removing chlorine, sediment, taste, odour and organic contaminants. Due to its highly uniform molded structure, the Omnipure carbon block benefits include the elimination of carbon fines release, as well as superior adsorptive capacity. Omnipure filters and cartridge elements are designed to flow in a radial, outside to inside direction resulting in low pressure drop, high flow rate and increased dirt holding capacity.

Manufactured entirely from FDA approved materials, the OmnipureBlock™ is suitable for residential point-of-use water filtration, as well as, commercial and food service applications. The OmnipureBlock™ is designed to fit most standard household and commercial housings.

Omnipure offers carbon block technology on all E-Series, K-Series, Q-Series and CL-Series filters. Capacity rates vary with size and have a top-end exceeding 10,000 gallons. Because of the unique manufacturing process, Omnipure is able to offer block technology which can be supplemented with other media to address unique water problems such as scaling, lead, silt and sand. Omnipure offers carbon blocks for most standard 4-7/8”, 9-3/4”, and 20” housings. The Omnipure filter elements are available in 10 micron, 5 micron, 1 micron, and 1 micron lead reduction formulations.

The Water Filter Company appreciates the quality of Omnipure’s fantastic filters, and we offer our customers a wide range of the innovative products created by Omnipure.

Made of highly durable injection-molded polypropylene, the L-Series is constructed from 100% NSF (National Sanitation Foundation) certified materials. It is offered in a variety of standard media options including granular activated carbon (GAC) for taste and odor reduction, depth filtration media to address sand, grit and sediment problems that can clog or damage down line equipment and a special blend polyphosphate media designed to control scaling associated with hard water.

The L-Series can also be ordered with the premium OmnipureBlock™ media. This family of carbon blocks utilises technology that optimises surface area for better contaminant absorption. Omnipure- Block™ is available in a high capacity ten micron activated carbon version and a water polishing, cystsreducing one micron version. A carbon/scale inhibitor and carbon/lead reduction version are available for the customer’s specific application needs.

The Water Filter Company offers a wide range of Omnipure’s quality filters, including the L-Series, enabling customers to  make a choice about which filter is right for them.

Understanding the different filter types and the benefits they each have to offer can make it easier to decipher which filter type is best for you. Here, we have outlined the most popular types of water filter to maker choosing a filter a more accessible task for our customers:

•  Activated Carbon Water Filters – This type of filter works to correct taste and odour problems. It’s also the most effective type of water filter capable of eliminating particular organic chemicals as well as some pesticide residues.
• Reverse Osmosis Filters – This another type of filtration system used when purifying drinking water. Unlike other water filter types, filtration systems using reverse osmosis require very little maintenance, making them convenient for personal use. In addition, they are capable of removing various kinds of harmful water contaminants to make drinking water safer.
• Ultrafilters – They are capable of eliminating microorganisms, colloids, pyrogens and other water particles. The downside of using ultrafilters is the fact that they do not have the ability to filter out dissolved inorganics.

The type of water filter that you should get will depend on the particles you want to eliminate. Only opt for good quality water filters to ascertain that they are capable of purifying water.

The Water Filter Company has a fantastic selection of water filters on offer that are suitable for both household and office use.

Reverse Osmosis systems filter out a wider range of contaminants than most ordinary carbon filters, helping deal with problems ordinary carbon filters typically can’t, for example: arsenic, lead, copper, sodium, nitrates, fluoride, cysts, TDS and pharmaceutical contaminants.

While many under-sink filters contain activated carbon, the carbon membrane does not remain in contact with water long enough to provide sufficient decontamination. Some consumers concerned with these hazards turn to bottled water as a solution. However, many companies simply bottle filtered tap water with no systems in place to test and remove these hazards. Since reverse osmosis is expensive to execute on large-scale supplies, drinking water treatment plants frequently opt for chlorine, a chemical that may make pharmaceuticals even more toxic to humans. Therefore, bottled water and instant filtration cartridges are not adequate protection against today’s complex drinking water contaminants.

Everpure’s signature Reverse Osmosis Systems offer water that is cleaner, safer, and better tasting, because consumers should never have to wonder exactly what their families are drinking. Designed to fit conveniently under nearly any sink, the combination of RO and carbon ensures you have the highest quality water at your tap.

The Water Filter Company is delighted to offer our customers such top quality products such as Everpure has designed.

The water filter company has a range of filter systems designed to suit all environment. One of our most popular systems  the GAC-10 system is perfect for use by the Beauty industry.

This 20 micron Pentek filter effectivly  reduces chlorine taste and odor from your water. The GAC-10′s unique construction allows water to flow in one end and out the other without escape, maximizing effeciency, and eliminating all bypass opportunity

The Pentek GAC-10 specifications:

• 20 Micron Rating   
• Reduces Chlorine, Taste & Odor
• 2 7/8″ x 9 3/4″ cartridge
• 1 Gallon Per Minute Flow Rate
• Temp Range: 40 – 125 Farenheit
• NSF/ANSI Standard 42 Tested

We supply this Cartridge on it’s own or with the Penkek 3g filter housing.We also order a range of installation kit’s to make plumbing the filter in a breeze.

Please contact us on 08455 004455 or use the contact form for further information on our range of solutions

Capable of removing up to 97% of most contaminants, this three stage Twist-Lock RO system utilizes two high capacity carbon block cartridges and a high purity RO membrane cartridge.
This system also utilizes the same quick and convenient connections as Spectrum Twist-Lock single, double and triple head POU cartridges, which means this system requires no tools for filter changes, making it one of the most practical and user friendly RO systems available on the market.
Economical and easy-to-use these units are wall mountable for convenience and represent an ideal space saving solution.

This system is ideal for use  in conjunction with one of our undersink chillers.

Please contact us on 08455 004455 to discuss your requirements or email contact@thewaterfiltercompany.co.uk

* Chlorine

* Cysts

* Asbestos

The cartridge itself  has a micron rating of 0.5 microns, has a filter life of six months or 3000 gallons (whichever comes first) and operates at a pressure of 10-125 PSI. This filter is designed to fir the QL3B filter head which is also available from “The water filter company”. Contact us today for current prices